Pet Urine Odor Eliminator - Directions

Works on Any Surface and Material: Noble Ion® with Liquid Positive Ion™ Odor Technology will safely work on any surface or material that it comes in contact with, including, carpet, fabric, leather, silk, concrete, metal, wood, sheetrock, plastic, or vinyl.


 > Dilutions: (1:1) - Mix 1 part Noble Ion® with 1 part Water <

For Best Results: Noble Ion® with Liquid Positive Ion™ Odor Technology works as a stand-alone odor elimination treatment without any additional urine removal procedures. If urine extraction is done first, it will take less of the Noble Ion® formulation to eliminate the odor. If treating an area where a high alkaline product was previously used, two separate applications of Noble Ion® may be necessary. One application to neutralize previous treatments and a second to effectively eliminate the odor. When finished, you can safely let Noble Ion® air-dry.


General Directions:

Prepare product (1:1) dilution: Mix 1 part Noble Ion® with 1 part Water in a clean sprayer or bucket.

1) Locate the pet urine contaminated areas with either a black light or moisture detector.

2) Use deep cleaning/extraction with water to remove urine, alkaline liquids, and urine crystals.

3) Spray or pour the Noble Ion® on the affected area until the odor is completely eliminated. Be sure to spray baseboards and walls which may be contaminated with urine

4) Clean soiled carpet only after odor is gone.

5) You can safely let Noble Ion® treated area air-dry.

Note: Odor elimination is instant when full contact is made, and results are easily detected due to no added fragrance, or smells.


Equipment Preparation: High pH products and products such as (OSR) Odor Stain Removers, bleach, antimicrobials, or other harsh chemicals that remain in the sprayer from previous jobs will diminish the performance of the Noble Ion® Liquid Positive Ions product on the current job.

To avoid that problem, all equipment such as backpack sprayers will need to be cleaned before filling with Noble Ion®.

  1. First, rinse equipment thoroughly with water.
  2. Next, add a small amount of Noble Ion® to the container and swish it around to completely neutralize any existing products.

Directions for Concrete/Wood Subfloors:

Prepare product (1:1) dilution: Mix 1 part Noble Ion® with 1 part Water in a clean sprayer or bucket.

1) Locate the pet urine contaminated areas with either a black light or moisture detector.

2) Use deep cleaning/extraction with water to remove urine, alkaline liquids, and urine crystals.

3) Spray or pour the Noble Ion® on the affected area until the odor is completely eliminated.

4) Clean soiled carpet only after odor is gone.

5) You can safely let Noble Ion® treated area air-dry.

Note: Odor elimination is instant when full contact is made, and results are easily detected due to no added fragrance, or smells.


Important:

Use: Two applications of Noble Ion® may be necessary if technician/customer has first used a high alkaline or enzyme cleaning product.

Equipment: High pH products and products such as (OSR) Odor Stain Removers, bleach, antimicrobials, or other chemicals that remain in equipment from previous jobs will diminish the performance of the Noble Ion® product on the current job.


Ingredients: Less than 1% of the ingredients in this formulation are considered by Zavada Scientific, LLC to be a trade secret in accordance with the provisions of the OSHA Hazard Communication Standard (29 CFR 1910.1200). Identities will be revealed to a qualified health professional (physician, nurse practitioner, EMT or physician’s assistant) in the event of an emergency.

CAS #                     Chemical Name                                           %                            EINECS#           
7732-18-5              Water; Ionized and Charged                    >99%                        231-791-2